|Heavy duty, non-hardening, moldable, dry PTFE thread sealant tape.
Steam, water, salt water, air, fuels, refrigerants, acids, alkalies, all solvents, and gases including hydrogen, ammonia, propane, butane, and nitrogen. Not for use on liquid or gaseous oxygen. For nitric or mixes acid services, consult manufacturer.
Seals metal or plastic threads-pipes or bolts-LMS 100 PTFE Pipe Tape is chemically inert and applicable to most types of threaded metal and plastic pipes or bolts.
LMS 100 PTFE Pipe Tape seals against thread leakage of most liquids and gases. It is nonreactive with steam, water, salt water, air, fuels, refrigerants, acids, alkalies, all solvents, and gases such as hydrogen, ammonia, propane, butane, and nitrogen. It will withstand hydraulic pressures of up to 100,000 PSI (703 kg/cm2) and has a temperature limit of 260 deg C (500 deg F).
LMS 100 PTFE Pipe Tape stays pliable, won't seize, and opens easily. It places a nonhardening, slippery layer of teflon between the mated threads. The tape remains flexible to resist vibration and permit easy disassembly of connections when required. Connections that might otherwise be destroyed are saved for reuse. The tape's flexibility minimizes slippage during application and thread connection. As the material is soft and pliable, deep thread penetration is obtained.
LMS 100 PTFE Pipe Tape is a heavy duty, high density tape which resists tearing. It is manufactured to the highest specifications. It is .0035 to .0038 mil thick. It has a very high density (1.6 Full Density) causing more PTFE per inch of length. As such it is the highest quality teflon tape available which results in savings to the user as usually only one layer is required to effect a seal. It is easier to install as it molds into the threads with finger pressure and resists tearing then threads are mated.
Easy-to-carry spools can be easily carried in the maintenance man's tool case or tool belt. Rugged spool and cover protect the tape from dirt and contamination. It provides an efficient, easy-to-use, easy-to-carry, and easy-to-apply sealant for pipe joints and bolt threads.
Dry, clean, no drip, no mess
Easy to carry-no spill. No cap to replace
Non-aging. Always ready to use.
Seal all plumbing and most industrial piping threads.
Directions for Use:
Wind tightly around threads in direction pieces will be screwed together. Start winding at open end of thread to prevent unwinding. One thickness is usually sufficient to fill all voids and make and effective seal.
Non-hardening, dry thread sealant for liquids, gases, pneumatic or hydraulic fittings. Prevents bolts and fittings from seizing up to 500 deg F (260 deg C).
Safety Engineering Guide:
Solid gap filler
Available in a full case of 144 rolls.