|NUTECH 8 Mechanical Seal
|MADE IN USA
Online store of Nutech seals, cartridge seal, mechanical seal, double cartridge seal for pumps, agitators, mixers, rotating equipment, fuels, oils, chemicals, water, slurries by Dixie Packing and Seal Company in Nashville, Tennessee, USA.
Related Products |
Rate this product|
Email product to friend
|MADE IN USA
An 'off the shelf' balanced internal seal for fuels, oils, chemicals, water and slurries. A general service seal for the maintenance man.
FEATURES AND BENEFITS:
The NUTECH 8 is internally balanced, requiring no special sleeves or costly machining of shouldered shafts.
The NUTECH 8 seal will not fret sleeves or shafts. The o-ring on the shaft is static and should any fretting occur from the dynamic o-ring, it will be to the carbon holder, the least expensive part of the seal.
EASY TO INSTALL:
One installation dimension is common to all NUTECH 8 seals, regardless of shaft size.
We supply an infield repair kit for a fraction of the original cost. You don't have to send back seals for repair or exchange-this way it costs you less.
FITS ALL AVS/ANSI PUMPS:
Replaces most seals or packing without pump or gland modification.
Springs are out of the fluid being pumped, isolated from clogging particles suspended in the product.
NUTECH 8 has eliminated unnecessary tight clearances leaving the seal open to continual washing by the product up to the o-ring.
The NUTECH 8 seal has a large cross section drive collar to eliminate distortion and static o-ring leakage.
1. Lay straight edge across stuffing box face and mark shaft with blueing.
2. Installation dimension is referenced from scribed line toward impeller (back of rotary is always 1 3/4" from stationary face).
3. Slide gland, stationary face then seal onto shaft. Align outboard end of rotary on scribed line. Tighten seet screws.
4. Assemble and tighten gland finger tight, then turn one more flat with wrench. Stationary seat will compress seal to correct working length.
EXCLUSIVE INFIELD REPAIR KIT:
When it comes time to replace your NUTECH 8 seal you can repair it in your shop with our off the sheld infield repair kit. No new seals at full price-no half price on exchange seals, but an infield repair kit at a fraction of the original cost. No rebuilts-all new components. Because of the exclusive design, your seal can be repaired over and over again-costing you less. A repair kit consists of: new rotary face and holder, o-rings, set screws and springs.
All NUTECH seals are manufactured to exact standards and are guaranteed free of defects in materials and workmanship. All seals are guaranteed for 90 days from delivery, excepting negligence, misuse, and abuse, and we will deliver at our expense a new seal to replace any seal found to be defective within said period. No registration card required. This warranty is expressly in lieu of all warranties, expressed or implied, and of all obligation or liabilities on our part, including any liability for incidental or consequential damages.
PLEASE CALL FOR PRICE QUOTE.