The Exact-A-Chem seal is an outside mounted rotary seal designed to seal corrosive fluids. No metal parts of the R6 are in direct contact with the pumped fluid.

The Exact-A-Chem seal is an outside mounted rotary seal designed to seal corrosive fluids. No metal parts of the R6 are in direct contact with the pumped fluid.

 NUTECH D6 ASSEMBLY SEAL

Features and Benefits

  • Low cost replacement seals made from expensive exotic materials.

  • The Exact-A-Chem seal is designed for use in corrosive fluids which readily attack the metal parts of conventional seals. With the Exact-A-Chem no metal parts are in contact with the fluid being pumped.

  • Easy installation - Exact-A-Chem comes pre-assembled: simply slide on until faces mate, tighten set screws and remove clips.

  • Faces can be cleaned and reset right on shaft, as seal is external to the stuffing box.

  • The Exact-A-Chem is internally balanced eliminating the requirements for expensive sleeve or shaft steps.

  • A visual check on wear/misalignment can be made, helping to eliminate unscheduled maintenance shutdowns.

  • Located closer to support bearing - less whip.

  • The Exact-A-Chem can be installed on pumps where the stuffing box is too shallow to accept a conventional internal seal.

 
 
Screen Shot 2018-11-29 at 1.52.09 PM.png
 
Screen Shot 2018-11-29 at 1.52.33 PM.png
 
Screen Shot 2018-11-29 at 1.52.25 PM.png
 
 

Request A Mechanical Seal product Quote

Use this form to provide us the necessary information to quote your seal:

 
Name *
Name
Phone
Phone
Manufacturer, serial number, model number, type, size, and metal components of wetted equipment parts
Stuffing Box Data
Product Data